Call Today

 

 

The author is making a number of great points on the subject of Hot Water Heater Repair as a whole in this great article followed below.

Lots of modern residences take advantage of an electrical water heater for their heating system, as a result of its convenience as well as simplicity of use. However, just like any other electric home appliances, problems might occur with its usage, all of a sudden. It can be really frustrating to awaken to a chilly shower instead of a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. The good news is, we've made a checklist of possible remedies to your water heater concerns. There are a number of variables that could trigger a lot of these issues, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for security. Whatever the trouble is, getting it repaired must not pose excessive of a concern if you follow these actions:

 

Examine Your Power Supply:

As basic as this might appear, it is very needed. Without adequate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power problem. Inspect if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, just transform it off and on once again. Change any kind of broken or worn-out fuse. Examine the appliance with power after these modifications to see if it's currently functioning.

 

Check the Heating Element in the Hot Water Heater:

If it's not a power trouble, after that try taking a look at your burner if it is still functioning. Test each of your heating elements to make sure the trouble isn't with any one of them. If any of them is defective, replace that part and after that inspect whether the warm water is back on.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm enough, you may need to inspect the temperature level setups on your top thermostat. Make certain the breaker is switched off before doing anything. Open the access panel as well as press the red button for temperature level reset over the thermostat. This must aid warm the water. Transform the breaker back on and also check if the problem has been dealt with.

 

Call An Expert:

If after replacing all faulty components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional opinion. The problem with your heater could be that the hot and cold faucets have actually been switched over or it might be undersized for the amount of hot water needed in your home. Whatever the case might be, a specialist plumber would certainly aid fix the problem.

 

Conclusion

Water heater troubles are not constantly major. A number of them are due to small problems like a blown fuse or worn-out heating element. Changing the damaged components must work. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a passionate person who reads about No Hot Water — Water Heater Repair, I think sharing that piece of content was a good idea. Sharing is good. One never knows, you may just be doing someone a favor. Many thanks for your time. Don't forget to check up our website back soon.

Source This Article